Grass-valley iTX Output Server 2 v.2.5 Bedienungsanleitung PDF herunterladen (Seite 28)

Setting Up Output Server 2

Configuring SCTE104 Features

• If you want the channel to process spliceStart_immediate insert commands,

enable Immediate Sequence Start.

These commands can be used to start a sequence early, but their usage is not

commended by SCTE 35 [1] and may result in inaccurate splices.

• If you want the channel to process

spliceEnd_immediate insert commands,

enable Immediate Sequence End.

These commands can be used to terminate a sequence earl

y, but must include the

correct event ID for the sequence that is to be canceled.

All message types can be enabled at once, if

required.

10 Enable the required Break Trigger Types by enabling or disabling the following

options:

• National Breaks

•Local Breaks

The table below describes the effects from va

rious combinations of these two options:

iTX will trigger in all cases, i.e. when it receives Multiple Operation

Messages with:

•Only a splice_request_data command (legacy SCTE104)

•Both a splice_request_

data and a

segmentation_descriptor_request (for either local or national

breaks).

NOTE:

If you are only using the legacy VANC plugin, both break trigger

types must be disabled.

iTX will only trigger if a Multiple Operation Message is received

with a

splice_request_data and a

segmentation_descriptor_request with the

segmentation_type_id set to National (value 0x32).

iTX will only trigger if a Multiple Operation Message is received

with a

splice_request_data and a

segmentation_descriptor_request with the

segmentation_type_id set to Local (value 0x30).

iTX will only trigger if a Multiple Operation Message is received

with a

splice_request_data and a

segmentation_descriptor_request with the

segmentation_type_id set to Local (value 0x30) or National

(value 0x32).

11 Click Save to store your changes and automatically reboot the Output Server 2 service.

Alternatively, wait until you have finished making changes in other areas of the

nfiguration panel, then click Save.

Combination Result

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Kommentare zu diesen Handbüchern

Keine Kommentare

Grass-valley iTX Output Server 2 v.2.5 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Grass-valley iTX Output Server 2 v.2.5