Grass-valley Kaleido-IP with Kaleido-X16 Cascade Manual Bedienungsanleitung

Step-by-Step ConfigurationM926-3904-10122 August 2013

8Cascade Upgrade7 Once the upload has completed, click Apply update.While the upgrade is taking place you can monitor its progress if you wish, or wai

9Kaleido-IP/Kaleido-X16 cascadeStep-by-Step Configuration10 Click Ye s to proceed.Your multiviewer will shut down, and then start again. This may take

10Limitations16 Remove the USB key from the USB port.You have now completed the upgrade, for both multiviewers in this cascade.LimitationsIn the curre

11Kaleido-IP/Kaleido-X16 cascadeStep-by-Step Configuration• EDID auto-detection is not supported. When configuring a cascade room, make sure the Use d

Contact UsMiranda Technical SupportFor technical assistance, please contact the Miranda Technical Support center nearest you:Corporate Head OfficeMira

iiNoticesCopyright & Trademark NoticeCopyright © 2012–2013, Miranda Technologies Partnership.. All rights reserved.Belden, Belden Sending All The

1 Kaleido-IP/Kaleido-X16 CascadeStep-by-Step ConfigurationThis document explains how to connect two multiviewers — a Kaleido-IP and a Kaleido-X16 — i

2Physical InstallationTo interconnect a Kaleido-IP and a Kaleido-X16 into a cascade1 Connect one of the Kaleido-IP’s DisplayPort outputs to a DVI inp

3Kaleido-IP/Kaleido-X16 cascadeStep-by-Step ConfigurationCascade Configuration in XEditAdding Multiviewers to a CascadeThe Kaleido-X software’s suppor

4Configuring Cascade Rooms3 If your PC and the multiviewer you wish to add are on the same subnet, then you can select the multiviewer’s IP address fr

5Kaleido-IP/Kaleido-X16 cascadeStep-by-Step Configuration3 Select the appropriate Kaleido-IP head from the Layer 2 head (for cascade configuration) li

6Cascade Upgrade4 Change something in every room (e.g. move a display and then bring it back to its initial position) to enable the Save button, and t

7Kaleido-IP/Kaleido-X16 cascadeStep-by-Step Configuration4Click Upgrade, in the navigation area on the left of the page.The Upgrade page appears.5Clic